diff --git a/src/main.cpp b/src/main.cpp
index 423ec8a..8ef673d 100644
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -13,12 +13,8 @@
 
 void printValues();
 
-const int maxCount = 10;
-int count = 0;
-bool noise = false;
-bool noiseActive = false;
-
 float ppm;
+bool noiseActive;
 
 MQ135 co2_sensor(PIN_MQ135);
 Adafruit_BME280 bme;
@@ -34,72 +30,47 @@ void setup() {
   Serial.begin(9600);
   co2_sensor.setR0(300);
 
-  if (!bme.begin(0x76)) {
-    Serial.println(F("Could not find a valid BME280 sensor, check wiring!"));
-  }
+  // if (!bme.begin(0x76)) {
+  //   Serial.println(F("Could not find a valid BME280 sensor, check wiring!"));
+  // }
 }
 
 void loop() {
-  if (count >= maxCount || count < 0) {
-    float temp = bme.readTemperature();
-    float humidity = bme.readHumidity();
-    ppm = co2_sensor.getCorrectedCO2(temp, humidity);
-    
-    count = 0;
-    noiseActive = false;
-    digitalWrite(PIN_LED_GREEN, 0);
-    digitalWrite(PIN_LED_GREEN2, 0);
-    digitalWrite(PIN_LED_YELLOW, 0);
-    digitalWrite(PIN_LED_YELLOW2, 0);
-    digitalWrite(PIN_LED_RED, 0);
-    digitalWrite(PIN_LED_RED2, 0);
+  // float temp = bme.readTemperature();
+  // float humidity = bme.readHumidity();
+  ppm = co2_sensor.getCO2();
+  
+  digitalWrite(PIN_LED_GREEN, 1);
+  digitalWrite(PIN_LED_GREEN2, 1);
+  digitalWrite(PIN_LED_YELLOW, 1);
+  digitalWrite(PIN_LED_YELLOW2, 1);
+  digitalWrite(PIN_LED_RED, 1);
+  digitalWrite(PIN_LED_RED2, 1);
 
-    if (ppm < 1000) {
-      digitalWrite(PIN_LED_GREEN, 1);
-      if (ppm > 750) {
-        digitalWrite(PIN_LED_GREEN2, 1);
-      }
-    }
-    if (ppm > 1000 && ppm <= 2000) {
-      digitalWrite(PIN_LED_YELLOW, 1);
-      if (ppm > 1500) {
-        digitalWrite(PIN_LED_YELLOW2, 1);
-      }
-    }
-    if (ppm > 2000) {
-      digitalWrite(PIN_LED_RED, 1);
-      if (ppm > 2500) {
-        noiseActive = true;
-        digitalWrite(PIN_LED_RED2, 1);
-      }
-    }
-
-    printValues();
-  }
+  printValues();
 
   if (noiseActive) {
-    noise = !noise;
-    // digitalWrite(PIN_NOISE, noise);
+    digitalWrite(PIN_NOISE, 1);
   }
   else {
-    // digitalWrite(PIN_NOISE, 0);
+    digitalWrite(PIN_NOISE, 0);
   }
 
   delay(100);
-  count++;
+  // noiseActive = !noiseActive;
 }
 
 void printValues() {
-  float temp = bme.readTemperature();
-  float humidity = bme.readHumidity();
+  // float temp = bme.readTemperature();
+  // float humidity = bme.readHumidity();
   float ppm = co2_sensor.getCO2();
-  float cppm = co2_sensor.getCorrectedCO2(temp, humidity);
+  // float cppm = co2_sensor.getCorrectedCO2(temp, humidity);
   Serial.print("ppm: ");
   Serial.println(ppm);
-  Serial.print("Temperature: ");
-  Serial.println(temp);
-  Serial.print("Humidity: ");
-  Serial.println(humidity);
-  Serial.print("corrected ppm: ");
-  Serial.println(cppm);
+  // Serial.print("Temperature: ");
+  // Serial.println(temp);
+  // Serial.print("Humidity: ");
+  // Serial.println(humidity);
+  // Serial.print("corrected ppm: ");
+  // Serial.println(cppm);
 }
\ No newline at end of file