initial commit

filaments/sunlu-pla+.ini

@@ -0,0 +1,57 @@
+[filament:Sunlu PLA+]
+bed_temperature = 65
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #0938F7
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 22.99
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 15
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_toolchange_delay = 0
+filament_type = PLA+
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = Made for Prusa
+filament_wipe = nil
+first_layer_bed_temperature = 70
+first_layer_temperature = 220
+full_fan_speed_layer = 4
+inherits = Prusa PLA
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 15
+slowdown_below_layer_time = 15
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
+temperature = 215

printers/ender3.ini

@@ -0,0 +1,77 @@
+[printer:Creality Ender-3 - MK]
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 3x3,228x3,228x228,3x228
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "Generic PLA @CREALITY"
+default_print_profile = 0.16mm OPTIMAL @CREALITY
+deretract_speed = 40
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
+extra_loading_move = -2
+extruder_colour = #FCE94F
+extruder_offset = 0x0
+gcode_flavor = marlin
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = Creality Ender-3
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+machine_limits_usage = emit_to_gcode
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_layer_height = 0.28
+max_print_height = 250
+min_layer_height = 0.08
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = 
+print_host = 
+printer_model = ENDER3
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 0
+retract_before_travel = 2
+retract_before_wipe = 70%
+retract_layer_change = 1
+retract_length = 5
+retract_length_toolchange = 1
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 60
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nBED_MESH_CALIBRATE METHOD=automatic ; create bed mesh\nG1 Z10 F240\nG1 X2 Y15 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X140 E10 F1500 ; prime the nozzle\nG1 Y17 F5000\nG92 E0\nG1 X10 E10 F1200 ; prime the nozzle\nG92 E0
+template_custom_gcode = 
+thumbnails = 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0